Our Pro Series kit is designed for the NC customer that requires the most from their brakes. Unlike many other kits on the market, we’ve improved the performance of both the caliper and rotor/hat combination. Reducing rotating mass and unsprung weight, increasing thermal capacity, and reducing consumable cost. We start with a Wilwood 12.190″ rotor paired with our CAD designed and FEA tested hats that weigh just over 1lb and are designed with cooling reliefs for great thermal dissipation. Our hats and brackets are CNC to a tolerance of .002″ for true run out and proper alignment. Kits are direct bolt on, unlike cheaper kits that require hub rings and alignment shims. But we didn’t stop there. Our kits use radial mount Dynapro radial mount systems that reduce lateral torsion, or flex, improving pedal feel and virtually eliminating pad taper. The strength of the DynaPro is a combination of process and design. The process of stress-flow forging re-aligns the internal grain structure of the metal to flow within the contour of the caliper body. This produces a part with superior strength compared to machined block billet parts or castings. The FEA generated body design features a radial transition between the piston bores and caliper bridges. This eliminates machined steps and shoulders in this critical strength area and substantially increases the resistance against deflection and body separation under high load. Structural deflection and volume displacement testing have proven the efficiency of this innovative design. A two-piece caliper is stiffer, has less failure points, and a 30% increase in pad volume compared to traditional 4 piston lug mount kits.Its improved outer radius offers greater wheel clearance than lug mount Dynalite in order to clear a large number of popular 16″ wheels.
The kit is spec’d with straight vanes rotors and curved vane Spec 37 upgrades are available. Wilwood BP20 pads are included, or upgrade to our recommended Cobalt pads for dedicated track use. 6 piston upgrades available for the ultimate track package please email for options.
-Ultra lightweight 12.190″ x .810 rotor and hat combo which weighs only 9.8lbs
-Hats and brackets are machined from billet 6061 T6 with a hard anodize finish. Stainless heli-coil inserts in brackets
-10.9 hardware and true bolt through design
-Setup removes up to 9lbs per corner of unsprung weight depending on year models
-Wildwood FNSL6R radial mount calipers, clear must aftermarket 16″ wheels
-Braided stainless brake lines
-Front kit can be upgraded to full four wheel BBK
-Liter of high performance brake fluid