Our Pro Series kit is designed for the NC customer that requires the most from their brakes. Unlike many other kits on the market, we’ve improved the performance of both the caliper and rotor/hat combination. Reducing rotating mass and unsprung weight, increasing thermal capacity, and reducing consumable cost. We start with a Wilwood 12.190″ rotor paired with our CAD designed and FEA tested hats that weigh just over 1lb and are designed with cooling reliefs for great thermal dissipation. Our hats and brackets are CNC to a tolerance of .002″ for true run out and proper alignment. Kits are direct bolt-on, unlike cheaper kits that require hub rings and alignment shims.
But, we didn’t stop there. Our kits use radial-mount Dynapro radial-mount systems that reduce lateral torsion, or flex, improving pedal feel and virtually eliminating pad taper. The strength of the DynaPro is a combination of process and design. The process of stress-flow forging re-aligns the internal grain structure of the metal to flow within the contour of the caliper body. This produces a part with superior strength compared to machined block billet parts or castings. The FEA generated body design features a radial transition between the piston bores and caliper bridges. This eliminates machined steps and shoulders in this critical strength area and substantially increases the resistance against deflection and body separation under high load. Structural deflection and volume displacement testing have proven the efficiency of this innovative design. A two-piece caliper is stiffer, has fewer failure points, and a 30% increase in pad volume compared to traditional 4 piston lug mount kits. Its improved outer radius offers greater wheel clearance than lug mount Dynalite in order to clear a large number of popular 16″ wheels. The kit is spec’d with straight vanes rotors and curved vane upgrades are available.
We wanted to offer the best performance in every single category, including wheel fitment. Our 11.75″ kits will clear most current aftermarket 17″. Check the wheel fitment templates below. Proper wheel clearance is the responsibility of the end-user.
- 11.75″ V8R NC Miata Wilwood Radial Mount Big Brake Kit Wheel Fitment Template
- 12.19″ V8R NC Miata Wilwood Radial Mount Big Brake Kit Wheel Fitment Template
- Wilwood Dynapro radial-mount calipers – 16mm pad
- Straight vane rotors – Floating rotor installation guide
- Motorsports-grade mounting hardware
- V8R billet 6061 caliper brackets with mounting hardware
- DOT approved stainless steel brake lines
- Type-III black hard coat anodized or electroless nickel plated hats
- Brake pads
- 12oz of high performance brake fluid